Grade 2 Titanium Foil – ASTM B265 Sheet and Coil

Description

Grade 2 Titanium Foil – ASTM B265 Sheet and Coil

📌 Product Overview

Request Grade 2 foil for your application: send thickness, width, cut length or coil quantity, tolerances, final condition, surface and edge requirements. For chemical or marine components, include medium, concentration, temperature and exposure conditions. Confirm required analysis and inspection documents. Browse titanium foils or send your drawing and service requirements.

The ASTM B265 Gr2 Titanium Foil catalogue describes commercially pure titanium, identified as Grade 2 Titanium Foil. Select foil dimensions, final material condition, surface and acceptance documents for chemical, marine, fabrication or electronic component inquiries.

For this CP Titanium Foil (Commercially Pure), the catalogue chemistry reference is at least 99% titanium. Confirm grade impurity limits, analysis basis and batch requirements. Select chemical service using the actual medium, concentration, temperature and exposure conditions.

🔬 Chemical Composition

For ASTM B265 Gr2 Titanium Foil identified as UNS R50400, the existing table provides catalogue chemistry references. Confirm ordered grade limits, standard edition, analysis methods and batch documents for acceptance.

Key Notes:

• Catalogue Chemistry – Confirm titanium analysis basis, impurity limits and required batch documents; review corrosion or device use against its actual service requirements.

• Low Interstitial Content – Confirm the supplied material condition and required mechanical/forming acceptance for the foil gauge and part geometry.

Review Rolled Alloys technical data for Grade 2 background. The existing ASTM B265 Gr2 Titanium Foil (UNS R50400) catalogue uses a 99% titanium reference; confirm the ordered chemistry limits and batch analysis of iron, oxygen, carbon, nitrogen and hydrogen. Use actual material condition and service exposure for selection.

⚙ Mechanical Properties

Catalogue mechanical properties of Grade 2 Titanium Foil (annealed condition): confirm the supplied gauge, test basis and ordered mechanical acceptance.

Use the reference properties for ASTM B265 Gr2 Titanium Foil with the specified material condition, gauge, geometry and component acceptance requirements.

🌊 Corrosion Resistance

Select CP Titanium Grade 2 Foil using the actual medium, concentration, temperature, contaminants and exposure. Review the following service inputs for the project:

• Marine Environments – Specify seawater chemistry, temperature, flow and crevice geometry for material and design selection.

• Chemical Processing – Identify chemicals, concentration, temperature, contaminants and exposure; evaluate reducing or oxidizing conditions for the actual service.

• Medical Applications – Specify the required material, surface cleanliness, fabrication and intended-use validation with the device manufacturer.

• Aerospace Applications – Confirm the project material specification, geometry, environment and finished-component qualification requirements.

Service Review: provide acid or oxidizer identity, concentration, temperature and exposure so the material and finished-component requirements can be evaluated.

🏭 Manufacturing Process

For ASTM B265 Gr2 Titanium Foil, confirm the manufacturing route, final condition and inspection requirements applicable to the ordered gauge:

1. Raw Material Selection – Specify CP2 chemistry, source identification and required lot documents.

2. Melting – State the required melt route, including vacuum arc remelting (VAR) when specified, and the relevant material acceptance requirements.

3. Hot Rolling – Confirm whether the ordered route includes hot rolling and the required intermediate or final condition.

4. Cold Rolling – Specify foil gauge, tolerance and final material condition for the required part.

5. Annealing – Confirm the required final annealed condition and ordered mechanical acceptance.

6. Surface Finishing – Specify pickled or polished surface requirements, cleanliness and acceptance criteria for the application.

7. Final Inspection – Agree dimensions, chemical analysis, mechanical tests and report requirements for the order.

📐 Available Sizes

The existing ASTM B265 Gr2 Titanium Foil catalogue lists these dimensions; confirm the requested gauge, width, length or coil format, condition and inspection requirements with the quotation:

• Thickness: 0.01 mm to 0.5 mm

• Width: Up to 1000 mm

• Length: Custom cut to order

• Tolerances: confirm the applicable ASTM B265 edition, requested dimensions, measurement method and agreed acceptance requirements.

Available finishes:

• Bright Annealed (BA)

• Matte Finish

• Polished

🚀 Applications

The Grade 2 Titanium Foil catalogue describes the following possible component forms. Use the drawing, service environment, supplied condition and applicable qualification to confirm material selection.

Aerospace

• Heat shields

• Honeycomb structures

• Lightweight structural components

Marine

• Heat exchanger plates

• Desalination plant components

• Seawater filtration membranes

Medical

• Surgical instrument parts with specified material, fabrication, cleanliness and intended-use validation.

• Device-casing inquiries with the specified material, manufacturing route, biological evaluation and intended-use requirements.

• Dental component inquiries subject to the required material, device design, fabrication and intended-use validation.

Chemical Processing

• Reactor linings

• Acid storage tank liners

• Gasket and sealing materials

Electronics

• EMI/RFI shielding

• Battery enclosures

• Precision components

📄 Order Specifications and Documents

For ASTM B265 Gr2 Titanium Foil, provide the required material specification, designation and document scope:

• ASTM B265 – Annealed titanium and titanium-alloy strip, sheet and plate; confirm the ordered grade, form, condition, edition and acceptance requirements.

• UNS R50400 – Grade 2 material designation; confirm ordered chemistry and acceptance requirements for the foil.

• ISO 9001:2015 – Request the current certificate and applicable facility/scope if required by the order.

🛠 Quality Assurance

For CP Titanium Foil, agree the required inspection methods, sampling or coverage and acceptance criteria:

• Dimensional Inspection – Define thickness, width, length and measurement/acceptance requirements.

• Chemical Composition Analysis – Specify grade impurity limits, analysis methods and required batch results.

• Mechanical Testing – Agree tensile, yield and elongation tests applicable to gauge and supplied condition.

• Surface Quality Check – Agree scratch, pit, contamination and finish acceptance criteria.

• Non-Destructive Testing (NDT) – Specify any required method and coverage, with suitability for the foil gauge and component acceptance criteria.

Confirm required Material Test Certificates (MTC) type, lot identification, chemical analysis, test results and traceability with the quotation and order.

📦 Packaging & Shipping

• Packaging: Rolls or flat sheets in moisture-proof wrapping, packed in wooden cases.

• Marking: Grade, dimensions, heat number, and batch number.

• Lead Time: 10–20 days depending on order size.

• Shipping: Global delivery via air, sea, or express courier.

💡 Key Advantages

✔ Select marine or chemical service using the actual medium and exposure
✔ Confirm supplied condition and forming geometry
✔ Specify foil gauge and finished-part acceptance
✔ Confirm intended-use validation for device components
✔ Order ASTM B265 material requirements for Grade 2 / UNS R50400

Grade 2 Titanium Foil Procurement FAQ

How should Grade 1 and Grade 2 be compared?
Grade 1 is a softer, highly formable CP choice; Grade 2 generally offers greater strength while remaining formable. Compare actual condition, gauge, geometry and service requirements.

What is required for a coil or cut-sheet quotation?
Send thickness and width, length or coil quantity, tolerances, surface, final material condition, edges and required inspection documents. Confirm the requested combination within the existing catalogue range.

How are chemical, marine or device applications specified?
For chemical or marine service provide medium, concentration, temperature, exposure and design requirements. For device components include the required material, fabrication and intended-use validation.

Review Grade 1 CP titanium foil, Grade 5 Ti-6Al-4V foil and Grade 9 Ti-3Al-2.5V foil, or browse titanium materials. Choose the grade and supplied condition against the part and service requirements.

📩 Contact Us for Pricing & Technical Support

📧 Email: sales@niticu.com
📞 Phone / WhatsApp / WeChat: +86 13335373172
🏭 Factory: Baotai Road Industrial Park, High-tech Zone, Baoji City, Shaanxi, China
🌐 Website: https://niticu.com