Description
Hastelloy C-276 Plate – ASTM B575 UNS N10276 Sheet
🔹 Product Overview
The Hastelloy C-276 Plate listing describes nickel-molybdenum-chromium material with tungsten additions, UNS N10276. ASTM B575 covers listed nickel-alloy plate, sheet and strip for general corrosive service. Specify the required edition, dimensions, final condition and inspection documents; define actual chemical exposure for project material selection.
For Hastelloy C-276 Sheet and plate enquiries involving FGD systems, chemical reactors or marine components, identify medium, concentration, impurities, temperature and fabrication condition. For background, the Haynes International datasheet provides manufacturer material information for comparison with the actual process requirements.
⚛️ Chemical Composition (Typical, wt%)
📌 UNS N10276 identifies the C-276 material. The chemical table retains catalog references; confirm the ordered limits and actual heat or lot analysis for acceptance.
| Element | Content (%) |
|---|---|
| Nickel (Ni) | Balance (>50%) |
| Molybdenum (Mo) | 15.0–17.0 |
| Chromium (Cr) | 14.5–16.5 |
| Iron (Fe) | 4.0–7.0 |
| Tungsten (W) | 3.0–4.5 |
| Cobalt (Co) | ≤2.5 |
| Manganese (Mn) | ≤1.0 |
| Vanadium (V) | ≤0.35 |
| Silicon (Si) | ≤0.08 |
| Carbon (C) | ≤0.01 |
| Phosphorus (P) | ≤0.04 |
| Sulfur (S) | ≤0.03 |
🌡️ Physical Properties
The physical entries below are catalog references. Confirm their test or temperature basis and relevance to the supplied condition and component design.
| Property | Value |
|---|---|
| Density | 8.89 g/cm³ |
| Melting Range | 1325–1370 °C |
| Specific Heat | 0.102 Btu/lb-°F (at 70 °F) |
| Electrical Resistivity | 1.29 μΩ·m |
| Thermal Conductivity | 10.1 W/m·K |
| Magnetic Properties | Essentially non-magnetic |
Use these entries for an initial Alloy C-276 Plate enquiry, then establish service acceptance using the actual medium, concentration, impurities, temperature and supplied condition. Additional background data can be found at ASM International.
🏋️ Mechanical Properties (Typical Annealed Condition)
The retained mechanical entries describe the catalog annealed reference. Specify the required solution-annealed condition, dimensions and lot test acceptance for the ordered ASTM B575 material.
| Property | Value |
|---|---|
| Tensile Strength | 100 ksi (690 MPa) |
| Yield Strength (0.2% offset) | 45 ksi (310 MPa) |
| Elongation | 40% |
| Hardness | Rockwell B95 (max) |
Compare nickel alloy plates and Hastelloy C-276 Sheet using the same medium, temperature, final condition, fabrication route and project acceptance criteria.
📏 Standards and Specifications
For Hastelloy C-276 Plate, identify the ordered material specifications and designations, then confirm their applicable scope and document requirements:
-
ASTM B575 – Nickel Alloy Plate, Sheet, and Strip
-
UNS N10276 – Unified Numbering System designation
-
ASME SB575 – Specify the applicable material requirements and edition separately from finished pressure-vessel or system qualification.
-
Werkstoff 2.4819 – Material designation to confirm with the ordered specification.
Available thickness: 0.5 mm – 100 mm
Width: up to 2500 mm
Length: customized upon request
🔧 Processing and Fabrication
For Hastelloy C-276 Plate, specify downstream process and acceptance requirements for the following fabrication topics:
-
✅ Forming: Define geometry, material condition and the proposed hot or cold forming process.
-
✅ Machining: Comparable to other high-strength nickel alloys; requires rigid tooling.
-
✅ Welding: Specify the TIG, MIG or shielded metal arc procedure, filler, shielding, final condition and required joint inspection.
-
✅ Heat Treatment: The existing 2050 °F (1121 °C) solution-annealing reference with rapid quenching is a catalog process topic. Confirm the ordered final condition and applicable heat-treatment requirements.
🌍 Applications of Hastelloy C-276 Plate
Enquiries for Hastelloy C-276 Sheet may involve the following chemical-process or component designs. Define medium, concentration, impurities, temperature, fabrication and system acceptance:
🏭 Chemical Processing
-
Heat exchangers, reactors, evaporators
-
Sulfuric acid and hydrochloric acid handling equipment
🌿 Environmental Engineering
-
Flue gas desulfurization (FGD) absorber towers
-
Pollution control scrubbers and fans
🧪 Pharmaceutical & Food
-
Reactors and vessels requiring high purity and corrosion resistance
🌊 Marine & Offshore
-
Seawater condensers
-
Pump components in saline environments
🔥 Energy & Power Generation
-
Heat recovery systems
-
High-temperature corrosive service environments
👉 For separate material-form enquiries, review our GR5 Titanium Plate or Nickel 200 Foil using the exact material and form required by the drawing and service conditions.
⚖️ Material Selection and Service Factors
Compare nickel alloy plates with Alloy C-276 Plate using the following project inputs:
-
✅ Identify oxidizing or reducing species, concentration, impurities and temperature in the actual medium.
-
✅ Define chloride exposure, deposits, crevice geometry and required corrosion assessment.
-
✅ Specify weld condition, procedure and any post-weld treatment or inspection required by the project.
-
✅ Establish loading, exposure duration and material or component acceptance for the intended service.
📦 Packaging and Delivery
Each Hastelloy C-276 Plate is carefully handled to prevent contamination and damage:
-
Standard export wooden pallets or cases
-
Plastic film or anti-rust coating applied upon request
-
Customized marking with heat numbers and standards
-
Global shipping available (by air/sea/express)
Order C-276 Plate for a Defined Chemical Process
Send thickness, width, length, cut layout, finish, final solution-annealed condition, tolerances, quantity and the drawing. Identify medium composition, concentration, impurities, moisture, temperature and any weld or forming process. Specify the ASTM B575 edition, required lot reports and project acceptance. Request a C-276 plate quotation.
Browse nickel alloy plates and sheets or compare Inconel 601 plate for thermal-processing requirements and Nickel 201 plate against the exact material and service specification.
C-276 Plate Ordering Questions
What chemical details are needed for material selection? Supply composition, concentration, impurities, moisture, temperature and operating exposure. Haynes C-276 material guidance presents condition-specific data; define the project assessment for the actual medium and fabrication state.
Which condition and documents should the order specify? Identify the required solution-annealed flat-product condition, surface, material specification edition, heat/lot identity and chemical/mechanical reports; confirm the agreed documents with the quotation.
📞 Contact Us
Looking for a reliable Hastelloy C-276 Plate supplier?
We provide technical consultation, price quotations, and global delivery.
📧 Email: sales@niticu.com
📞 Phone / WhatsApp / WeChat: +86 13335373172
🏭 Factory: Baotai Road Industrial Park, High-tech Zone, Baoji City, Shaanxi, China
🌐 Website: https://niticu.com
📩 Contact us today for pricing, samples, and expert technical support — we respond within 24 hours.
Reviews
There are no reviews yet.