Description
Inconel 601 Plate – ASTM B168 UNS N06601 Sheet
The Inconel 601 Plate listing describes nickel-chromium-iron alloy UNS N06601, also referenced as Werkstoff 2.4851. Special Metals Corporation publishes alloy background and oxidation-service data. For thermal-processing or component enquiries, specify dimensions, supplied condition, atmosphere, temperature, cycling, load and inspection requirements.
Use the ASTM B168 standard reference for ordered Inconel 601 / N06601 plate, sheet or strip material requirements. Confirm the edition, supplied condition, dimensions and required chemical/mechanical evidence with the quotation.
📌 Key Highlights
✅ ASTM B168 Order Requirements – Specify the edition, supplied condition and lot acceptance.
✅ Oxidation-Service Reference – The existing 2200°F (1200°C) catalog temperature reference requires assessment of atmosphere, load, exposure duration and component design.
✅ Corrosion Selection – Identify sulfuric, nitric, hydrochloric or other medium, concentration, impurities and temperature for material assessment.
✅ Mechanical Acceptance – Specify test basis and component requirements for the actual temperature, duration and supplied condition.
✅ Metallurgical Condition – Confirm cold work, heat treatment, section size and exposure conditions.
✅ Welding and Fabrication Requirements – Define the TIG, MIG or resistance-welding procedure, shielding and final acceptance.
🧪 Chemical Composition (Typical, wt%)
The composition entries below are catalog references. Compare the ordered N06601 chemistry requirements with the requested heat or lot analysis.
| Element | Content (%) |
|---|---|
| Nickel (Ni) | 58.0–63.0 |
| Chromium (Cr) | 21.0–25.0 |
| Iron (Fe) | Balance |
| Aluminum (Al) | 1.0–1.7 |
| Carbon (C) | ≤ 0.10 |
| Manganese (Mn) | ≤ 1.0 |
| Silicon (Si) | ≤ 0.5 |
| Sulfur (S) | ≤ 0.015 |
| Copper (Cu) | ≤ 1.0 |
Aluminum contributes to protective oxide formation in alloy 601 oxidation service. Evaluate the actual atmosphere, temperature, contaminants and thermal cycle for the intended component.
⚙️ Mechanical Properties (Room Temperature)
The following entries are room-temperature catalog references. Establish acceptance for the supplied condition, dimensions and test basis; service-temperature strength and time-dependent behavior require their own project assessment.
| Property | Typical Value |
|---|---|
| Tensile Strength | ≥ 550 MPa (80 ksi) |
| Yield Strength (0.2%) | ≥ 205 MPa (30 ksi) |
| Elongation | ≥ 30% |
| Hardness | 160–200 HB |
| Density | 8.11 g/cm³ |
| Melting Range | 1360–1411°C |
For Inconel 601 Plate, assess service-temperature strength and exposure effects using the supplied condition, section size, atmosphere, load and duration. Confirm the data and acceptance required by the component design.
🏭 Typical Applications
Inconel 601 plate enquiries may involve the following heat-processing or component designs. Specify the service atmosphere, temperature, load and applicable system or component acceptance:
-
🔥 Heat-treating equipment: Retorts, muffles, conveyor belts, trays, and baskets.
-
🛠 Thermal reactors: Burner nozzles, flame shields, and recuperators.
-
⚙️ Aerospace systems: Jet engine components, tailpipes, exhaust liners, and afterburners.
-
🧪 Chemical processing plants: Catalyst beds, reactor vessels, and gas scrubbers.
-
⚡ Power generation: Flue gas desulfurization, superheaters, and reheater tubes.
-
🧱 Ceramic production: Support structures and radiant tube assemblies.
For cyclic thermal service, provide heating and cooling conditions, atmosphere, contamination limits, exposure duration and loading. Review material selection and component acceptance against that operating cycle.
📐 Available Dimensions & Custom Options
We offer fully customizable Inconel 601 Plate products based on client-specific requirements:
-
Thickness: 0.5 mm to 50 mm
-
Width: Up to 1500 mm
-
Length: Up to 6000 mm or as per drawing
-
Surface Finishes: No.1 (hot rolled), 2B, brushed, or mirror polished
-
Flatness & Tolerance: Confirm the ordered ASTM B168 edition and drawing-specific flatness or machining requirements with the quotation.
🎯 We provide optional value-added services including waterjet cutting, laser cutting, plasma profiling, edge grinding, and mechanical polishing.
📦 Packaging & Logistics
All Inconel 601 Plates are carefully packaged using industry-standard export packaging to ensure safe delivery:
-
Moisture barrier film or vacuum-sealed wrapping
-
Anti-corrosion oil coating (on request)
-
Wooden crates or pallets with steel strapping
-
Marking: Alloy grade, heat number, lot number, thickness, and dimensions
We support global delivery via air, sea, or courier with full customs and export documentation.
📄 Ordered Material References and Documents
-
ASTM B168 / ASME SB168: confirm the required material edition and acceptance scope.
-
UNS N06601
-
EN 10095 / DIN 17750: confirm applicability and edition when required by the drawing.
-
Werkstoff 2.4851
-
Specify the required EN 10204 3.1 mill test certificates, heat identification and inspection scope; confirm documents with the quotation.
-
Optional third-party inspection (SGS, BV, TUV)
Order Inconel 601 Plate for Thermal-Processing Components
Send thickness, width, length or cutting layout, final material condition, finish, flatness, tolerances, quantity and the drawing. State atmosphere, temperature, heating/cooling cycles, contaminants, load and exposure duration. Specify the ASTM B168 edition and required chemical/mechanical lot reports. Request a 601 plate quotation.
Browse nickel alloy plates and sheets or compare C-276 plate for a defined chemical-process enquiry and low-carbon Nickel 201 plate using each material’s drawing and service requirements.
601 Plate Ordering Questions
What furnace information should the enquiry include? Provide atmosphere, contaminants, temperature, thermal cycling, load, time and component geometry. Official 601 alloy guidance supports material selection; confirm the required assessment for the actual design.
How should mechanical-property requirements be stated? Identify the final condition, test temperature, section dimensions and required lot results. Use the room-temperature catalog table as an enquiry reference and define hot-service acceptance separately.
📞 Contact Us
At Shaanxi Nickel Titanium Copper Metal Co., Ltd, we deliver reliable nickel alloy solutions with expert technical support and fast worldwide shipping.
📧 Email: sales@niticu.com
📱 Phone / WhatsApp / WeChat: +86 13335373172
🏭 Factory: Baotai Road Industrial Park, High-tech Zone, Baoji City, Shaanxi, China
🌐 Website: https://niticu.com
📩 Request your quote today – we respond within 24 hours with datasheets, pricing, and lead time details.
Reviews
There are no reviews yet.